FS / HDD помирает и ложит систему

Danyas

Danyas

Участник
Сообщения
2,173
Реакции
1,072
upload_2016-4-20_22-0-21.png

Что это может значить, гугл особо путнего ничего не сказал
 
Tallanvor

Tallanvor

НЕ ПИШУ я плагины!!! И не правлю! И ваще...
Сообщения
1,352
Реакции
554
@Danyas,
apt-get install smartmontools
smartctl -a /dev/sda

Выхлоп - под спойлер
 
Danyas

Danyas

Участник
Сообщения
2,173
Реакции
1,072
C-подобный: 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung Spinpoint F4
Device Model:     ST320DM001 HD322GJ
Serial Number:    S2BJJ90C933156
LU WWN Device Id: 5 0004cf 208771a7e
Firmware Version: 1AR10001
User Capacity:    320,072,933,376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Apr 20 23:40:33 2016 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         ( 2760) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  46) minutes.
SCT capabilities:            (0x003f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       2
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   083   083   025    Pre-fail  Always       -       5226
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       32
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1106
10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       32
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       16
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   061   000    Old_age   Always       -       33 (Min/Max 8/39)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       110
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       2
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       33

SMART Error Log Version: 1
ATA Error Count: 76 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 76 occurred at disk power-on lifetime: 1100 hours (45 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 08      00:00:37.644  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:37.644  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:00:37.644  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:37.644  IDENTIFY DEVICE
  00 00 01 01 00 00 00 08      00:00:37.644  NOP [Abort queued commands]

Error 75 occurred at disk power-on lifetime: 1100 hours (45 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 08      00:00:37.638  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:37.638  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:00:37.638  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:37.638  IDENTIFY DEVICE
  00 00 01 01 00 00 00 08      00:00:37.638  NOP [Abort queued commands]

Error 74 occurred at disk power-on lifetime: 1100 hours (45 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 08      00:00:37.573  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:37.573  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:00:37.573  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:37.573  IDENTIFY DEVICE
  00 00 01 01 00 00 00 08      00:00:37.573  NOP [Abort queued commands]

Error 73 occurred at disk power-on lifetime: 1100 hours (45 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 08      00:00:37.567  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:37.567  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:00:37.567  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:37.567  IDENTIFY DEVICE
  00 00 08 08 97 85 e5 08      00:00:37.567  NOP [Abort queued commands]

Error 72 occurred at disk power-on lifetime: 1083 hours (45 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 08      00:00:10.286  IDENTIFY DEVICE
  00 00 00 7f 22 c6 e0 08      00:00:10.285  NOP [Abort queued commands]
  00 00 18 68 22 c6 e6 08      00:00:10.262  NOP [Abort queued commands]
  ec 00 00 00 00 00 a0 08      00:00:10.245  IDENTIFY DEVICE
  00 00 08 60 22 c6 e6 08      00:00:10.245  NOP [Abort queued commands]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
andrey19992

andrey19992

Участник
Сообщения
487
Реакции
101
Возьми какойнить прогой прогони на беды, потом затри их, или перепиши, хз че там проги делают с бедами. недавно так ноут 2006года HDD восстановил, затер 356 бедов и норм))) правда сиску надо после затирания переустанавливать. Делал через LiveCD. по линь не знаю таких прог, но они должны быть
 
Danyas

Danyas

Участник
Сообщения
2,173
Реакции
1,072
Monomizer написал(а):
Оффтоп
Нажмите, чтобы раскрыть...

Оффтоп
andrey19992 написал(а):
Возьми какойнить прогой прогони на беды, потом затри их, или перепиши, хз че там проги делают с бедами. недавно так ноут 2006года HDD восстановил, затер 356 бедов и норм))) правда сиску надо после затирания переустанавливать. Делал через LiveCD. по линь не знаю таких прог, но они должны быть
Нажмите, чтобы раскрыть...
Беды с утра проверял какой-то утилой с под системы, ничего не нашло.
 
andrey19992

andrey19992

Участник
Сообщения
487
Реакции
101
Danyas написал(а):
Оффтоп

Беды с утра проверял какой-то утилой с под системы, ничего не нашло.
Нажмите, чтобы раскрыть...

Ну в общем из личного опыта, если HDD начал сыпаться, то лечи не лечи, всё ровно продолжит. Меняй HDD, что бы в будущем не сталкиваться с этой проблемой!!! Если чтото важное, делай RAID 0 и всё хорошо :-)
 
W

WINS

Участник
Сообщения
264
Реакции
97
UDMA_CRC_Error_Count
не растет случаем?
 
Danyas

Danyas

Участник
Сообщения
2,173
Реакции
1,072
Харду два месяца, до этого он отлеживался несколько лет в офисном помещении.
Старые харды тоже такие же приколы выдавали
--- Добавлено позже ---
Было (в посте выше):
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 110
Стало (сейчас):
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 110
--- Добавлено позже ---
Apr 19 19:03:18 server kernel: [ 3297.868239] ata4: soft resetting link
Apr 19 19:03:19 server kernel: [ 3298.048231] ata4.01: configured for UDMA/133
Apr 19 19:03:19 server kernel: [ 3298.048252] ata4: EH complete
Apr 19 19:03:19 server kernel: [ 3298.820243] ata4: soft resetting link
Apr 19 19:03:19 server kernel: [ 3299.000250] ata4.01: configured for UDMA/133
Apr 19 19:03:19 server kernel: [ 3299.000265] ata4: EH complete
Apr 19 19:03:20 server kernel: [ 3299.028213] ata4: soft resetting link
Apr 19 19:03:20 server kernel: [ 3299.208245] ata4.01: configured for UDMA/133
Apr 19 19:03:20 server kernel: [ 3299.208260] ata4: EH complete
Apr 19 19:03:20 server kernel: [ 3299.608034] ata4.01: limiting speed to UDMA/100:PIO4
Apr 19 19:03:20 server kernel: [ 3299.608220] ata4: soft resetting link
Apr 19 19:03:20 server kernel: [ 3299.788228] ata4.01: configured for UDMA/100
Apr 19 19:03:20 server kernel: [ 3299.788235] ata4: EH complete
Apr 19 19:03:20 server kernel: [ 3299.928254] ata4: soft resetting link
Apr 19 19:03:21 server kernel: [ 3300.108221] ata4.01: configured for UDMA/100
Apr 19 19:03:21 server kernel: [ 3300.108236] ata4: EH complete
Apr 19 19:03:21 server kernel: [ 3300.128222] ata4: soft resetting link
Apr 19 19:03:21 server kernel: [ 3300.308220] ata4.01: configured for UDMA/100
Apr 19 19:03:21 server kernel: [ 3300.308229] ata4: EH complete
Apr 19 19:03:21 server kernel: [ 3300.341563] ata4: soft resetting link
Apr 19 19:03:21 server kernel: [ 3300.520224] ata4.01: configured for UDMA/100
Apr 19 19:03:21 server kernel: [ 3300.520231] ata4: EH complete
Apr 19 19:03:21 server kernel: [ 3300.544031] ata4.01: limiting speed to UDMA/33:PIO4
Apr 19 19:03:21 server kernel: [ 3300.553814] ata4: soft resetting link
Apr 19 19:03:21 server kernel: [ 3300.732228] ata4.01: configured for UDMA/33
Apr 19 19:03:21 server kernel: [ 3300.732236] ata4: EH complete
Apr 19 19:03:21 server kernel: [ 3300.845768] ata4: soft resetting link
Apr 19 19:03:22 server kernel: [ 3301.024242] ata4.01: configured for UDMA/33
Apr 19 19:03:22 server kernel: [ 3301.024257] ata4: EH complete
Apr 19 19:03:22 server kernel: [ 3301.053835] ata4: soft resetting link
Apr 19 19:03:22 server kernel: [ 3301.232223] ata4.01: configured for UDMA/33
Apr 19 19:03:22 server kernel: [ 3301.232235] ata4: EH complete
Apr 19 19:03:22 server kernel: [ 3301.261735] ata4: soft resetting link
Apr 19 19:03:22 server kernel: [ 3301.440228] ata4.01: configured for UDMA/33
Apr 19 19:03:22 server kernel: [ 3301.440236] ata4: EH complete
Apr 19 19:03:22 server kernel: [ 3301.465699] ata4: soft resetting link
Apr 19 19:03:22 server kernel: [ 3301.644249] ata4.01: configured for UDMA/33
Apr 19 19:03:22 server kernel: [ 3301.644264] ata4: EH complete
Apr 19 19:03:22 server kernel: [ 3301.673837] ata4: soft resetting link
Apr 19 19:03:22 server kernel: [ 3301.852226] ata4.01: configured for UDMA/33
Apr 19 19:03:22 server kernel: [ 3301.852243] ata4: EH complete
Apr 19 19:03:22 server kernel: [ 3301.881900] ata4: soft resetting link
Apr 19 19:03:23 server kernel: [ 3302.060210] ata4.01: configured for UDMA/33
Apr 19 19:03:23 server kernel: [ 3302.060226] ata4: EH complete
Apr 19 19:03:23 server kernel: [ 3302.089982] ata4: soft resetting link
Apr 19 19:03:23 server kernel: [ 3302.268253] ata4.01: configured for UDMA/33
Apr 19 19:03:23 server kernel: [ 3302.268270] ata4: EH complete
Apr 19 19:03:23 server kernel: [ 3302.297918] ata4: soft resetting link
Apr 19 19:03:23 server kernel: [ 3302.476242] ata4.01: configured for UDMA/33
Apr 19 19:03:23 server kernel: [ 3302.476257] ata4: EH complete
Apr 19 19:03:23 server kernel: [ 3302.502021] ata4: soft resetting link
Apr 19 19:03:23 server kernel: [ 3302.680225] ata4.01: configured for UDMA/33
Apr 19 19:03:23 server kernel: [ 3302.680232] ata4: EH complete
Apr 19 19:03:23 server kernel: [ 3302.709940] ata4: soft resetting link
Apr 19 19:03:23 server kernel: [ 3302.888229] ata4.01: configured for UDMA/33
Apr 19 19:03:23 server kernel: [ 3302.888245] ata4: EH complete
Apr 19 19:03:23 server kernel: [ 3302.954197] ata4: soft resetting link
Apr 19 19:03:24 server kernel: [ 3303.132227] ata4.01: configured for UDMA/33
Apr 19 19:03:24 server kernel: [ 3303.132234] ata4: EH complete
Apr 19 19:03:24 server kernel: [ 3303.162042] ata4: soft resetting link
Apr 19 19:03:24 server kernel: [ 3303.340222] ata4.01: configured for UDMA/33
Apr 19 19:03:24 server kernel: [ 3303.340229] ata4: EH complete
Apr 19 19:03:24 server kernel: [ 3303.369932] ata4: soft resetting link
Apr 19 19:03:24 server kernel: [ 3303.548219] ata4.01: configured for UDMA/33
Apr 19 19:03:24 server kernel: [ 3303.548227] ata4: EH complete
Apr 19 19:03:24 server kernel: [ 3303.573969] ata4: soft resetting link
Apr 19 19:03:24 server kernel: [ 3303.752232] ata4.01: configured for UDMA/33
Apr 19 19:03:24 server kernel: [ 3303.752249] ata4: EH complete
Apr 19 19:03:24 server kernel: [ 3303.826006] ata4: soft resetting link
Apr 19 19:03:24 server kernel: [ 3304.004228] ata4.01: configured for UDMA/33
Apr 19 19:03:24 server kernel: [ 3304.004237] ata4: EH complete
Apr 19 19:03:25 server kernel: [ 3304.030459] ata4: soft resetting link
Apr 19 19:03:25 server kernel: [ 3304.208222] ata4.01: configured for UDMA/33
Apr 19 19:03:25 server kernel: [ 3304.208239] ata4: EH complete
Apr 19 19:03:25 server kernel: [ 3304.342014] ata4: soft resetting link
Apr 19 19:03:25 server kernel: [ 3304.520220] ata4.01: configured for UDMA/33
Apr 19 19:03:25 server kernel: [ 3304.520230] sd 3:0:1:0: [sdc]
Apr 19 19:03:25 server kernel: [ 3304.520233] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 19 19:03:25 server kernel: [ 3304.520235] sd 3:0:1:0: [sdc]
Apr 19 19:03:25 server kernel: [ 3304.520236] Sense Key : Aborted Command [current] [descriptor]
Apr 19 19:03:25 server kernel: [ 3304.520240] Descriptor sense data with sense descriptors (in hex):
Apr 19 19:03:25 server kernel: [ 3304.520241] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 19 19:03:25 server kernel: [ 3304.520249] 0f 3b 61 40
Apr 19 19:03:25 server kernel: [ 3304.520253] sd 3:0:1:0: [sdc]
Apr 19 19:03:25 server kernel: [ 3304.520256] Add. Sense: Scsi parity error
Apr 19 19:03:25 server kernel: [ 3304.520259] sd 3:0:1:0: [sdc] CDB:
Apr 19 19:03:25 server kernel: [ 3304.520260] Read(10): 28 00 0f 3b 61 18 00 00 e8 00
Apr 19 19:03:25 server kernel: [ 3304.521709] ata4: EH complete
Apr 19 19:03:25 server kernel: [ 3304.550160] ata4: soft resetting link
Apr 19 19:03:25 server kernel: [ 3304.728227] ata4.01: configured for UDMA/33
Apr 19 19:03:25 server kernel: [ 3304.728234] ata4: EH complete
Apr 19 19:03:25 server kernel: [ 3304.758112] ata4: soft resetting link
Apr 19 19:03:25 server kernel: [ 3304.936250] ata4.01: configured for UDMA/33
Apr 19 19:03:25 server kernel: [ 3304.936267] ata4: EH complete
Apr 19 19:03:25 server kernel: [ 3304.966067] ata4: soft resetting link
Apr 19 19:03:26 server kernel: [ 3305.144221] ata4.01: configured for UDMA/33
Apr 19 19:03:26 server kernel: [ 3305.144230] ata4: EH complete
Apr 19 19:03:26 server kernel: [ 3305.234069] ata4: soft resetting link
Apr 19 19:03:26 server kernel: [ 3305.412220] ata4.01: configured for UDMA/33
Apr 19 19:03:26 server kernel: [ 3305.412227] ata4: EH complete
Apr 19 19:03:26 server kernel: [ 3305.450049] ata4: soft resetting link
Apr 19 19:03:26 server kernel: [ 3305.628216] ata4.01: configured for UDMA/33
Apr 19 19:03:26 server kernel: [ 3305.628224] ata4: EH complete
Apr 19 19:03:26 server kernel: [ 3305.674279] ata4: soft resetting link
Apr 19 19:03:26 server kernel: [ 3305.852224] ata4.01: configured for UDMA/33
Apr 19 19:03:26 server kernel: [ 3305.852233] ata4: EH complete
Apr 19 19:03:26 server kernel: [ 3305.958007] ata4: soft resetting link
Apr 19 19:03:27 server kernel: [ 3306.136230] ata4.01: configured for UDMA/33
Apr 19 19:03:27 server kernel: [ 3306.136237] ata4: EH complete
Apr 19 19:03:27 server kernel: [ 3306.162044] ata4: soft resetting link
Apr 19 19:03:27 server kernel: [ 3306.340217] ata4.01: configured for UDMA/33
Apr 19 19:03:27 server kernel: [ 3306.340224] ata4: EH complete
Apr 19 19:03:27 server kernel: [ 3306.382141] ata4: soft resetting link
Apr 19 19:03:27 server kernel: [ 3306.560225] ata4.01: configured for UDMA/33
Apr 19 19:03:27 server kernel: [ 3306.560242] ata4: EH complete
Apr 19 19:03:27 server kernel: [ 3306.634124] ata4: soft resetting link
Apr 19 19:03:27 server kernel: [ 3306.812243] ata4.01: configured for UDMA/33
Apr 19 19:03:27 server kernel: [ 3306.812260] ata4: EH complete
Apr 19 19:03:27 server kernel: [ 3306.838259] ata4: soft resetting link
Apr 19 19:03:28 server kernel: [ 3307.016223] ata4.01: configured for UDMA/33
Apr 19 19:03:28 server kernel: [ 3307.016231] ata4: EH complete
Apr 19 19:03:28 server kernel: [ 3307.045994] ata4: soft resetting link
Apr 19 19:03:28 server kernel: [ 3307.224222] ata4.01: configured for UDMA/33
Apr 19 19:03:28 server kernel: [ 3307.224230] ata4: EH complete
Apr 19 19:03:28 server kernel: [ 3307.254109] ata4: soft resetting link
Apr 19 19:03:28 server kernel: [ 3307.432216] ata4.01: configured for UDMA/33
Apr 19 19:03:28 server kernel: [ 3307.432224] ata4: EH complete
Apr 19 19:03:28 server kernel: [ 3307.462087] ata4: soft resetting link
Apr 19 19:03:28 server kernel: [ 3307.640234] ata4.01: configured for UDMA/33
Apr 19 19:03:28 server kernel: [ 3307.640242] ata4: EH complete
Apr 19 19:03:28 server kernel: [ 3307.666094] ata4: soft resetting link
Apr 19 19:03:28 server kernel: [ 3307.844222] ata4.01: configured for UDMA/33
Apr 19 19:03:28 server kernel: [ 3307.844231] sd 3:0:1:0: [sdc]
Apr 19 19:03:28 server kernel: [ 3307.844232] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 19 19:03:28 server kernel: [ 3307.844234] sd 3:0:1:0: [sdc]
Apr 19 19:03:28 server kernel: [ 3307.844236] Sense Key : Aborted Command [current] [descriptor]
Apr 19 19:03:28 server kernel: [ 3307.844239] Descriptor sense data with sense descriptors (in hex):
Apr 19 19:03:28 server kernel: [ 3307.844240] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 19 19:03:28 server kernel: [ 3307.844247] 0f 00 97 80
Apr 19 19:03:28 server kernel: [ 3307.844250] sd 3:0:1:0: [sdc]
Apr 19 19:03:28 server kernel: [ 3307.844253] Add. Sense: Scsi parity error
Apr 19 19:03:28 server kernel: [ 3307.844255] sd 3:0:1:0: [sdc] CDB:
Apr 19 19:03:28 server kernel: [ 3307.844257] Read(10): 28 00 0f 00 97 80 00 01 58 00
Apr 19 19:03:28 server kernel: [ 3307.845751] ata4: EH complete
Apr 19 19:03:28 server kernel: [ 3307.934125] ata4: soft resetting link
Apr 19 19:03:29 server kernel: [ 3308.112216] ata4.01: configured for UDMA/33
Apr 19 19:03:29 server kernel: [ 3308.112223] ata4: EH complete
Apr 19 19:03:29 server kernel: [ 3308.170145] ata4: soft resetting link
Apr 19 19:03:29 server kernel: [ 3308.348228] ata4.01: configured for UDMA/33
Apr 19 19:03:29 server kernel: [ 3308.348329] ata4: EH complete
Apr 19 19:03:29 server kernel: [ 3308.378121] ata4: soft resetting link
Apr 19 19:03:29 server kernel: [ 3308.556229] ata4.01: configured for UDMA/33
Apr 19 19:03:29 server kernel: [ 3308.556361] ata4: EH complete
Apr 19 19:03:29 server kernel: [ 3308.586118] ata4: soft resetting link
Apr 19 19:03:29 server kernel: [ 3308.764223] ata4.01: configured for UDMA/33
Apr 19 19:03:29 server kernel: [ 3308.764325] ata4: EH complete
Apr 19 19:03:29 server kernel: [ 3308.794045] ata4: soft resetting link
Apr 19 19:03:29 server kernel: [ 3308.972227] ata4.01: configured for UDMA/33
Apr 19 19:03:29 server kernel: [ 3308.972305] ata4: EH complete
Apr 19 19:03:29 server kernel: [ 3308.998238] ata4: soft resetting link
Apr 19 19:03:30 server kernel: [ 3309.176219] ata4.01: configured for UDMA/33
Apr 19 19:03:30 server kernel: [ 3309.176385] ata4: EH complete
Apr 19 19:03:30 server kernel: [ 3309.265980] ata4: soft resetting link
Apr 19 19:03:30 server kernel: [ 3309.444220] ata4.01: configured for UDMA/33
Apr 19 19:03:30 server kernel: [ 3309.444302] ata4: EH complete
Apr 19 19:03:30 server kernel: [ 3309.470072] ata4: soft resetting link
Apr 19 19:03:30 server kernel: [ 3309.648226] ata4.01: configured for UDMA/33
Apr 19 19:03:30 server kernel: [ 3309.648301] ata4: EH complete
Apr 19 19:03:30 server kernel: [ 3309.678150] ata4: soft resetting link
Apr 19 19:03:30 server kernel: [ 3309.856230] ata4.01: configured for UDMA/33
Apr 19 19:03:30 server kernel: [ 3309.856308] ata4: EH complete
Apr 19 19:03:30 server kernel: [ 3309.886072] ata4: soft resetting link
Apr 19 19:03:31 server kernel: [ 3310.064228] ata4.01: configured for UDMA/33
Apr 19 19:03:31 server kernel: [ 3310.064296] ata4: EH complete
Apr 19 19:03:31 server kernel: [ 3310.094111] ata4: soft resetting link
Apr 19 19:03:31 server kernel: [ 3310.272247] ata4.01: configured for UDMA/33
Apr 19 19:03:31 server kernel: [ 3310.272359] ata4: EH complete
Apr 19 19:03:31 server kernel: [ 3310.301980] ata4: soft resetting link
Apr 19 19:03:31 server kernel: [ 3310.480219] ata4.01: configured for UDMA/33
Apr 19 19:03:31 server kernel: [ 3310.480298] sd 3:0:1:0: [sdc]
Apr 19 19:03:31 server kernel: [ 3310.480300] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 19 19:03:31 server kernel: [ 3310.480302] sd 3:0:1:0: [sdc]
Apr 19 19:03:31 server kernel: [ 3310.480304] Sense Key : Aborted Command [current] [descriptor]
Apr 19 19:03:31 server kernel: [ 3310.480308] Descriptor sense data with sense descriptors (in hex):
Apr 19 19:03:31 server kernel: [ 3310.480309] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 19 19:03:31 server kernel: [ 3310.480317] 0f 04 53 80
Apr 19 19:03:31 server kernel: [ 3310.480321] sd 3:0:1:0: [sdc]
Apr 19 19:03:31 server kernel: [ 3310.480325] Add. Sense: Scsi parity error
Apr 19 19:03:31 server kernel: [ 3310.480327] sd 3:0:1:0: [sdc] CDB:
Apr 19 19:03:31 server kernel: [ 3310.480329] Read(10): 28 00 0f 04 52 90 00 01 60 00
Apr 19 19:03:31 server kernel: [ 3310.481828] ata4: EH complete
Apr 19 19:03:31 server kernel: [ 3310.803274] ata4: soft resetting link
Apr 19 19:03:31 server kernel: [ 3310.980227] ata4.01: configured for UDMA/33
Apr 19 19:03:31 server kernel: [ 3310.980243] ata4: EH complete
Apr 19 19:03:32 server kernel: [ 3311.103372] ata4: soft resetting link
Apr 19 19:03:32 server kernel: [ 3311.280218] ata4.01: configured for UDMA/33
Apr 19 19:03:32 server kernel: [ 3311.280227] ata4: EH complete
Apr 19 19:03:32 server kernel: [ 3311.309991] ata4: soft resetting link
Apr 19 19:03:32 server kernel: [ 3311.488230] ata4.01: configured for UDMA/33
Apr 19 19:03:32 server kernel: [ 3311.488247] ata4: EH complete
Apr 19 19:03:32 server kernel: [ 3311.514032] ata4: soft resetting link
Apr 19 19:03:32 server kernel: [ 3311.692219] ata4.01: configured for UDMA/33
Apr 19 19:03:32 server kernel: [ 3311.692235] ata4: EH complete
Apr 19 19:03:32 server kernel: [ 3311.722051] ata4: soft resetting link
Apr 19 19:03:32 server kernel: [ 3311.900213] ata4.01: configured for UDMA/33
Apr 19 19:03:32 server kernel: [ 3311.900221] ata4: EH complete
Apr 19 19:03:33 server kernel: [ 3312.067316] ata4: soft resetting link
Apr 19 19:03:33 server kernel: [ 3312.244231] ata4.01: configured for UDMA/33
Apr 19 19:03:33 server kernel: [ 3312.244249] ata4: EH complete
Apr 19 19:03:33 server kernel: [ 3312.378288] ata4: soft resetting link
Apr 19 19:03:33 server kernel: [ 3312.556223] ata4.01: configured for UDMA/33
Apr 19 19:03:33 server kernel: [ 3312.556239] ata4: EH complete
Apr 19 19:03:33 server kernel: [ 3312.583334] ata4: soft resetting link
Apr 19 19:03:33 server kernel: [ 3312.760216] ata4.01: configured for UDMA/33
Apr 19 19:03:33 server kernel: [ 3312.760224] ata4: EH complete
Apr 19 19:03:33 server kernel: [ 3312.790058] ata4: soft resetting link
Apr 19 19:03:33 server kernel: [ 3312.968220] ata4.01: configured for UDMA/33
Apr 19 19:03:33 server kernel: [ 3312.968228] ata4: EH complete
Apr 19 19:03:33 server kernel: [ 3312.998090] ata4: soft resetting link
Apr 19 19:03:34 server kernel: [ 3313.176230] ata4.01: configured for UDMA/33
Apr 19 19:03:34 server kernel: [ 3313.176237] ata4: EH complete
Apr 19 19:03:34 server kernel: [ 3313.206027] ata4: soft resetting link
Apr 19 19:03:34 server kernel: [ 3313.384220] ata4.01: configured for UDMA/33
Apr 19 19:03:34 server kernel: [ 3313.384236] ata4: EH complete
Apr 19 19:03:34 server kernel: [ 3313.410107] ata4: soft resetting link
Apr 19 19:03:34 server kernel: [ 3313.588219] ata4.01: configured for UDMA/33
Apr 19 19:03:34 server kernel: [ 3313.588237] sd 3:0:1:0: [sdc]
Apr 19 19:03:34 server kernel: [ 3313.588239] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 19 19:03:34 server kernel: [ 3313.588241] sd 3:0:1:0: [sdc]
Apr 19 19:03:34 server kernel: [ 3313.588243] Sense Key : Aborted Command [current] [descriptor]
Apr 19 19:03:34 server kernel: [ 3313.588246] Descriptor sense data with sense descriptors (in hex):
Apr 19 19:03:34 server kernel: [ 3313.588247] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 19 19:03:34 server kernel: [ 3313.588254] 0f 04 2d c0
Apr 19 19:03:34 server kernel: [ 3313.588257] sd 3:0:1:0: [sdc]
Apr 19 19:03:34 server kernel: [ 3313.588260] Add. Sense: Scsi parity error
Apr 19 19:03:34 server kernel: [ 3313.588262] sd 3:0:1:0: [sdc] CDB:
Apr 19 19:03:34 server kernel: [ 3313.588264] Read(10): 28 00 0f 04 2d a0 00 02 00 00
Apr 19 19:03:34 server kernel: [ 3313.589755] ata4: EH complete
Apr 19 19:03:34 server kernel: [ 3313.618075] ata4: soft resetting link
Apr 19 19:03:34 server kernel: [ 3313.796247] ata4.01: configured for UDMA/33
Apr 19 19:03:34 server kernel: [ 3313.796265] ata4: EH complete
Apr 19 19:03:34 server kernel: [ 3313.826035] ata4: soft resetting link
Apr 19 19:03:34 server kernel: [ 3314.004221] ata4.01: configured for UDMA/33
Apr 19 19:03:34 server kernel: [ 3314.004231] ata4: EH complete
Apr 19 19:03:35 server kernel: [ 3314.034109] ata4: soft resetting link
Apr 19 19:03:35 server kernel: [ 3314.212226] ata4.01: configured for UDMA/33
Apr 19 19:03:35 server kernel: [ 3314.212233] ata4: EH complete
Apr 19 19:03:35 server kernel: [ 3314.266162] ata4: soft resetting link
Apr 19 19:03:35 server kernel: [ 3314.444237] ata4.01: configured for UDMA/33
Apr 19 19:03:35 server kernel: [ 3314.444244] ata4: EH complete
Apr 19 19:03:35 server kernel: [ 3314.474164] ata4: soft resetting link
Apr 19 19:03:35 server kernel: [ 3314.652222] ata4.01: configured for UDMA/33
Apr 19 19:03:35 server kernel: [ 3314.652240] ata4: EH complete
Apr 19 19:03:35 server kernel: [ 3314.682018] ata4: soft resetting link
Apr 19 19:03:35 server kernel: [ 3314.860217] ata4.01: configured for UDMA/33
Apr 19 19:03:35 server kernel: [ 3314.860233] ata4: EH complete
Apr 19 19:03:35 server kernel: [ 3314.899569] ata4: soft resetting link
Apr 19 19:03:36 server kernel: [ 3315.076217] ata4.01: configured for UDMA/33
Apr 19 19:03:36 server kernel: [ 3315.076230] ata4: EH complete
Apr 19 19:03:36 server kernel: [ 3315.115289] ata4: soft resetting link
Apr 19 19:03:36 server kernel: [ 3315.292236] ata4.01: configured for UDMA/33
Apr 19 19:03:36 server kernel: [ 3315.292251] ata4: EH complete
Apr 19 19:03:36 server kernel: [ 3315.374067] ata4: soft resetting link
Apr 19 19:03:36 server kernel: [ 3315.552230] ata4.01: configured for UDMA/33
Apr 19 19:03:36 server kernel: [ 3315.552240] ata4: EH complete
Apr 19 19:03:36 server kernel: [ 3315.578158] ata4: soft resetting link
Apr 19 19:03:36 server kernel: [ 3315.756230] ata4.01: configured for UDMA/33
Apr 19 19:03:36 server kernel: [ 3315.756248] ata4: EH complete
Apr 19 19:03:36 server kernel: [ 3315.786371] ata4: soft resetting link
Apr 19 19:03:36 server kernel: [ 3315.964214] ata4.01: configured for UDMA/33
Apr 19 19:03:36 server kernel: [ 3315.964236] ata4: EH complete
Apr 19 19:03:37 server kernel: [ 3316.222186] ata4: soft resetting link
Apr 19 19:03:37 server kernel: [ 3316.400218] ata4.01: configured for UDMA/33
Apr 19 19:03:37 server kernel: [ 3316.400227] ata4: EH complete
Apr 19 19:03:37 server kernel: [ 3316.429928] ata4: soft resetting link
Apr 19 19:03:37 server kernel: [ 3316.608219] ata4.01: configured for UDMA/33
Apr 19 19:03:37 server kernel: [ 3316.608227] ata4: EH complete
Apr 19 19:03:37 server kernel: [ 3316.638140] ata4: soft resetting link
Apr 19 19:03:37 server kernel: [ 3316.816343] ata4.01: configured for UDMA/33
Apr 19 19:03:37 server kernel: [ 3316.816359] ata4: EH complete
Apr 19 19:03:37 server kernel: [ 3316.851360] ata4: soft resetting link
Apr 19 19:03:38 server kernel: [ 3317.028227] ata4.01: configured for UDMA/33
Apr 19 19:03:38 server kernel: [ 3317.028243] ata4: EH complete
Apr 19 19:03:38 server kernel: [ 3317.058020] ata4: soft resetting link
Apr 19 19:03:38 server kernel: [ 3317.236224] ata4.01: configured for UDMA/33
Apr 19 19:03:38 server kernel: [ 3317.236242] ata4: EH complete
Apr 19 19:03:38 server kernel: [ 3317.331253] ata4: soft resetting link
Apr 19 19:03:38 server kernel: [ 3317.508225] ata4.01: configured for UDMA/33
Apr 19 19:03:38 server kernel: [ 3317.508240] ata4: EH complete
Apr 19 19:03:38 server kernel: [ 3317.538024] ata4: soft resetting link
Apr 19 19:03:38 server kernel: [ 3317.716230] ata4.01: configured for UDMA/33
Apr 19 19:03:38 server kernel: [ 3317.716246] ata4: EH complete
Apr 19 19:05:50 server kernel: [ 3449.880016] ata4: link is slow to respond, please be patient (ready=0)
Apr 19 19:05:55 server kernel: [ 3454.868013] ata4: device not ready (errno=-16), forcing hardreset
Apr 19 19:05:55 server kernel: [ 3454.868021] ata4: soft resetting link
Apr 19 19:05:56 server kernel: [ 3455.048224] ata4.01: configured for UDMA/33
Apr 19 19:05:56 server kernel: [ 3455.048236] ata4: EH complete
Apr 19 19:06:51 server kernel: [ 3510.936020] ata4: link is slow to respond, please be patient (ready=0)
Apr 19 19:06:56 server kernel: [ 3515.920017] ata4: device not ready (errno=Apr 19 23:25:33 server rsyslogd: [origin software="rsyslogd" swVersion="8.4.2" x-pid="526" x-info="rsyslog"] start
 
Последнее редактирование:
Tallanvor

Tallanvor

НЕ ПИШУ я плагины!!! И не правлю! И ваще...
Сообщения
1,352
Реакции
554
Странное поведение...
Что-то мне подсказывает, что проблема не в самом венике...
@Danyas, уеть возможность поставить его в другую тачку?
В идеале - с другим шлейфом.

Или ко мне притащи на выходных, вместе отдебажим...
 
Danyas

Danyas

Участник
Сообщения
2,173
Реакции
1,072
Tallanvor написал(а):
Странное поведение...
Что-то мне подсказывает, что проблема не в самом венике...
@Danyas, уеть возможность поставить его в другую тачку?
В идеале - с другим шлейфом.

Или ко мне притащи на выходных, вместе отдебажим...
Нажмите, чтобы раскрыть...

Он вроде как работает, только что-то с ним непонятное происходит, время от времени.
Похожая проблема была на IDE харде, там шлейф пошатали и забыли на недели две, потом всё чаще и чаще возникала эта проблема, пришлось купить сатовский хард (который в шапке и указан).

Поставить в другую тачку немного проблематично, так как нужно будет его там оставить на дней 5-8, а то и больше что бы проблема возникла опять.
Шлейф заменю, возможно поможет.

Отобрать выходные - слишком нагло, и возможно неэффективно)
А вот на пиво выйти - можно :D
 
Tallanvor

Tallanvor

НЕ ПИШУ я плагины!!! И не правлю! И ваще...
Сообщения
1,352
Реакции
554
Danyas

Danyas

Участник
Сообщения
2,173
Реакции
1,072
C-подобный: 
root@server:/home/server# tail /var/log/syslog.1
Apr 27 06:25:01 server kernel: [396978.939926] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Apr 27 06:25:02 server kernel: [396979.142527] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
Apr 27 06:25:02 server kernel: [396979.145005] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Apr 27 06:25:02 server kernel: [396979.347222] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040
Apr 27 06:25:02 server kernel: [396979.349497] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Apr 27 06:25:02 server exim4: ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly broken
Apr 27 06:25:02 server kernel: [396979.552096] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
Apr 27 06:25:02 server kernel: [396979.554682] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
Apr 27 06:25:02 server kernel: [396979.756940] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00008040
Apr 27 06:25:02 server kernel: [396979.759725] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up

Начало такими логами теперь меня радовать
 
Tallanvor

Tallanvor

НЕ ПИШУ я плагины!!! И не правлю! И ваще...
Сообщения
1,352
Реакции
554
@Danyas, это явно что-то сетевое, с диском никак не связанное...
Более внятно пока ничего добавить не могу - с телефона много не нагуглишь))
 
Войдите или зарегистрируйтесь для ответа.

Похожие темы

Mr_panica
ИИ в современном Sourcemod и серверостроении
Ответы
9
Просмотры
886
Ragnar
R
ZooM4322
Помогите с плагином
Ответы
3
Просмотры
410
ZooM4322
ZooM4322
Аластар
Вылет игры
Ответы
10
Просмотры
864
Sammit92
S
DENZEL519
Server-Side SmokeNade [NO TEST] - AI
2
Ответы
20
Просмотры
2К
7pElllHuK
7pElllHuK
Grey83
Проблема с доступом на форум с ПК
Ответы
11
Просмотры
1К
HooLIGUN
HooLIGUN
Сверху Снизу