Кокрас это я и хотел в целом спросить.Раньше это расширение выбивало и в "meta list", а не только в "sm exts list".
После обновления sourcemod до 1.4.0 у меня перестал работать HLstatsX CE ingame plugin, а на другом сервере, где стоит сорсмод 1.3.9 - этот плагин корректно работает, деймон проверял, всё ок. На сервере пишу в чат rank, top10 - ничего не происходит..
cfg/sourcemod - sourcemod.cfg:Возник такой вопрос , как можно скрыть действия админов , например бан и тд , чтобы другие люди не видели , что такой -то админ забанил того-то на столько и по пречине такой-то)
Добрый день, помогите пожалуйста.
1.Куда добавлять конфиги и как настроить,чтобы они были видны в админки в меню "Выполнить конфигурацию?
2.Немного не относиться к теме, но всё же куда кидать карты и как настроить, чтобы их можно было качать с сервера?
Заранее спасибо.
Здравствуйте, вот такая проблема.
Купил сервер на линуксе, пытаюсь его сделать(настроить), и не могу установить souresmod....
Просто невкакую!!! и так и этак, полностью даже обновлял сервер, ставил старые версии и все без толку.
з.ы\ мета-мод устанавливаю, работает, как только закину соурес-мод не работает.
ЛОГИ:
Это когда не работает.Это когда работает.Auto detecting CPU
Using default binary: ./srcds_linux
Server will auto-restart if there is a crash.
Running a benchmark to measure system clock frequency...
Finished RDTSC test. To prevent the startup delay from this benchmark, set the environment variable RDTSC_FREQUENCY to 2666.000000 on this system. This value is dependent upon the CPU clock speed and architecture and should be determined separately for each server. The use of this mechanism for timing can be disabled by setting RDTSC_FREQUENCY to 'disabled'.
Using breakpad minidump system
Using breakpad crash handler
Console initialized.
Game.dll loaded for "Counter-Strike: Source"
Setting breakpad minidump AppID = 240
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Installing breakpad exception handler for appid(240)/version(4833)
maxplayers set to 10
No '-replayserverdir' parameter found - using default replay folder.
Replay: Creating thread pool...succeeded.
Replay: Starting thread pool with 4 threads...succeeded.
Cleaning files from temp dir, "/home/braentv/service60/css/cstrike/replay/server/tmp/" ...no files removed.
Unknown command "r_decal_cullsize"
maxplayers set to 10
WARNING: Port 27005 was unavailable - bound to port 27009 instead
WARNING: Port 27020 was unavailable - bound to port 27024 instead
Network: IP 91.226.94.2, mode MP, dedicated Yes, ports 27038 SV / 27009 CL
04/16/2012 - 16:06:03: -------- Mapchange to de_dust2 --------Auto detecting CPU
Using default binary: ./srcds_linux
Server will auto-restart if there is a crash.
Running a benchmark to measure system clock frequency...
Finished RDTSC test. To prevent the startup delay from this benchmark, set the environment variable RDTSC_FREQUENCY to 2666.000000 on this system. This value is dependent upon the CPU clock speed and architecture and should be determined separately for each server. The use of this mechanism for timing can be disabled by setting RDTSC_FREQUENCY to 'disabled'.
Using breakpad minidump system
Using breakpad crash handler
Console initialized.
Game.dll loaded for "Counter-Strike: Source"
Setting breakpad minidump AppID = 240
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Installing breakpad exception handler for appid(240)/version(4833)
maxplayers set to 10
No '-replayserverdir' parameter found - using default replay folder.
Replay: Creating thread pool...succeeded.
Replay: Starting thread pool with 4 threads...succeeded.
Cleaning files from temp dir, "/home/braentv/service60/css/cstrike/replay/server/tmp/" ...no files removed.
Unknown command "r_decal_cullsize"
maxplayers set to 10
WARNING: Port 27005 was unavailable - bound to port 27009 instead
WARNING: Port 27020 was unavailable - bound to port 27024 instead
Network: IP 91.226.94.2, mode MP, dedicated Yes, ports 27038 SV / 27009 CL
ConVarRef room_type doesn't point to an existing ConVar
Executing dedicated server config file server.cfg
Initializing Steam libraries for secure Internet server
Failed to load Steam Service
ServiceStart: failed to start
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
--------------------------------------------------------
sv_pure set to 2.
Note: Changes to sv_pure take effect when the next map is loaded.
--------------------------------------------------------
exec banned_user.cfg: file size larger than 1 MB!
exec banned_ip.cfg: file size larger than 1 MB!
Writing cfg/banned_user.cfg.
Writing cfg/banned_ip.cfg.
maxplayers set to 11 (extra slot was added for SourceTV)
--------------------------------------------------------
sv_pure set to 0.
Note: Changes to sv_pure take effect when the next map is loaded.
--------------------------------------------------------
Unknown command "sm_deadtalk"
Unknown command "wm_min_ready"
Unknown command "wm_max_players"
'warmod/on_map_load.cfg' not present; not executing.
Connection to Steam servers successful.
Public IP is 91.226.94.2.
Assigned anonymous gameserver Steam ID [A-1:1109314563(2933)].
VAC secure mode is activated.
Как я понял у него впс или дедик, поэтому это не особо важно.FLiPi[GO написал(а):;62749]А Хост какой?
Это что за лишние команды. Поставь чистый сервер, затем ставь см и мм с оф.сайта.Unknown command "sm_deadtalk"
Unknown command "wm_min_ready"
Unknown command "wm_max_players"
'warmod/on_map_load.cfg' not present; not executing.